If you are choosing a floor for a hallway that takes wet shoes, a kitchen where things get spilt, or a wet room where people walk barefoot, the useful question is not "is this floor slip-resistant?" It is "slip-resistant in what conditions, for whose feet, and for how long?" A floor that grips well when dry can behave very differently with a film of water, cooking oil or soap on it. The good news is that you can ask suppliers for the right evidence and choose with some confidence.
Start with how the room is actually used
The Health and Safety Executive describes slipping as the result of several factors working together, not the floor alone. Its slip potential model lists the floor material, contamination, cleaning, footwear, behaviour, use and environment (HSE, Assessing the slip resistance of flooring). That is a helpful way to think about your own rooms before you look at a single sample.
Ask yourself three things for each area:
- What gets on the floor? Rain and tracked-in water at a front door, grease and food in a kitchen, soapy water in a shower area.
- Who walks on it, and in what? Outdoor shoes, slippers, socks or bare feet.
- How will it be cleaned? A quick mop, a wet vacuum, a brush, a hose.
HSE notes that almost all slips happen when floors are wet or dirty, and that on smooth surfaces such as standard vinyl, glazed ceramic tiles and varnished wood, even a tiny amount of contamination can cause a real problem (HSE, The importance of floor cleaning). People rarely slip on a clean, dry floor. So the conditions you expect matter more than the product category.
Why the material name tells you very little
"Vinyl", "porcelain", "rubber" and "natural stone" each cover a wide range of finishes. Two vinyls can feel and perform completely differently when wet. Appearance is also unreliable: a textured or profiled look does not guarantee grip, and HSE warns that people tend to take less care on surfaces they see as grippy (HSE slips FAQ).
HSE's simple first check is useful here. Find the product name and ask for the technical data sheet. If the manufacturer does not claim the floor is slip-resistant when wet, it will probably be slippery in wet conditions (HSE slips FAQ).
You can also get a rough feel by hand. HSE suggests asking whether a surface feels more like paper or sandpaper; fine roughness helps in the wet, smoothness does not (HSE slips FAQ). Treat that as a way to rule things out, not as a result.
Reading a test result properly
The pendulum test
HSE's preferred method is the pendulum test, which swings a rubber slider imitating a heel across the floor and gives a pendulum test value, or PTV (HSE, Assessing the slip resistance of flooring). It can be run dry or with contamination, so a PTV only means something alongside the condition it was tested in.
HSE's guidance reproduces a classification from the UK Slip Resistance Group: a PTV of 36 or more is described as low slip potential, 25 to 35 as moderate, and 24 or below as high. Read that carefully. It is a classification of slip potential for the conditions tested. It is not a legal pass mark, a certificate or a promise that nobody will slip. A high dry result tells you nothing about a wet floor.
The slider matters too. HSE says Slider 96 rubber is suitable for assessing shod pedestrians, while barefoot areas should be assessed with Slider 55, and profiled floors may benefit from both (HSE, Assessing the slip resistance of flooring). For a wet room or pool surround, a result for shoes is not a result for bare feet.
Surface roughness
Some data sheets quote surface roughness as Rz. HSE says this gives a good indication of slipperiness in water-wet conditions, and can be used to track wear over time. Thicker contaminants such as oil need more roughness to keep the same grip, so a roughness figure for water does not transfer to a greasy kitchen floor (HSE, Assessing the slip resistance of flooring).
R ratings and A, B, C ratings
Many tiles are sold with German ramp ratings: R9 to R13, or A, B and C for barefoot areas. HSE has reservations about these tests because the contaminants used (motor oil, or soap solution for barefoot) are not representative, and the classifications have sometimes led to the wrong floors being installed. It warns that R9, and in some cases R10, will be slippery in wet or greasy conditions, and that A, and often B, will be slippery when wet (HSE, Assessing the slip resistance of flooring). If an R rating is all you are given, ask whether pendulum data exists as well.
Ex-factory results
Most manufacturer data comes from products as supplied. HSE points out that grouting, cleaning, burnishing, polishing and even short periods of use can change slip resistance significantly, and that a bare "CoF" figure with no test named should be treated with uncertainty (HSE, Assessing the slip resistance of flooring). What you want is data that relates to the floor as finished and with the contamination you expect.
Cleaning is part of the choice
A floor's grip depends heavily on how it is kept. HSE notes that detergent is needed to shift grease, because water alone will not, and that too strong a solution can work as badly as too weak. Mopping only skims the surface and leaves a thin film of water, which is enough to make a smooth floor slippery until it dries (HSE, The importance of floor cleaning). At home that simply means: wipe spills up with something absorbent rather than spreading them, and let a mopped smooth floor dry before anyone walks across it.
Rougher safety-type floors can take a little more effort to clean and hold a bit more water after mopping. HSE suggests a dry mop or wet vacuum to finish off, so dirt is not left behind in low spots (HSE slips FAQ). It is worth knowing this before you buy, so you choose a surface you will actually keep clean.
At entrances, well-maintained matting can stop water reaching the floor in the first place (HSE, The importance of floor cleaning).
Thinking about the long term
Grip changes with wear. HSE notes that profiled surfaces round off with use and lose slip resistance, and that inappropriate maintenance changes performance too (HSE slips FAQ). Ask the supplier which cleaning products and polishes to avoid, since some finishes can make a floor smoother.
Be cautious about treatments sold to add grip to an existing tiled floor. HSE explains that many acid-etch products use hydrofluoric acid, which carries serious health risks, that they work by dissolving part of the surface, and that you should be wary of any claim to change slip resistance without changing the appearance (HSE slips FAQ).
If you ever want certainty about an installed floor, HSE says the pendulum test is the best measure, carried out by a competent operator, and suggests thinking about whether a testing company has an interest in finding problems (HSE slips FAQ).
Homes, workplaces and Scotland
If the floor is in a workplace, such as a shop, café or office, the Workplace (Health, Safety and Welfare) Regulations 1992 apply. Regulation 12 requires workplace floors to be suitable for their purpose and not slippery so as to expose people to risk, and to be kept free of substances that could cause a slip, so far as reasonably practicable (Regulation 12). That duty is about workplaces; it is not a rule for your own kitchen.
If you are building or altering a home in Scotland under a building warrant, the relevant guidance is the Scottish building standards technical handbook, not English guidance. The domestic handbook dated April 2026 applies to warrants submitted on or after 6 April 2026 (Scottish Government; edition index). Check the current edition with your designer or verifier if flooring forms part of warranted work.
A short checklist for suppliers
Take this with you, or send it with your sample request:
- Which test was used: pendulum, roughness, or a ramp test? Can I see the report or data sheet?
- Was it tested dry, wet, or with another contaminant?
- For pendulum results, which slider: 96 for shoes or 55 for bare feet?
- Was the sample tested as supplied, or as installed and finished?
- Do you claim it is slip-resistant when wet? In writing?
- If only an R or A/B/C rating is given, is pendulum data available?
- How should it be cleaned, and what products or polishes should be avoided?
- What happens to grip as it wears?
Once you have two or three shortlisted products, ask each supplier for the data sheet and answers to these questions before you order samples. Compare the answers for the conditions in your own room, and choose the one whose evidence matches how that floor will really be used.















